DrayTek V166-K Vigor 166 G.FAST and VDSL2 Ethernet Modem/Bridge

Description Draytek Vigor V166-K Key Features G.fast (Ultrafast Fibre) & VDSL2 (Superfast Fibre) to Ethernet ModemBridges DSL to your Router or FirewallPre-Configured to work with most ISPsIPv6 and IPv4 CompatibleCompatible with IPTV and Video on Demand (YouView, Sky Q)2 Gigabit LAN PortsOptional VigorCare Available G.Fast & VDSL2 35b CapableUp to 330mbps download and 50mbps upload with G.Fast technology. Can be used with all the latest DSL standards, with Vectoring and 35b SuperVectoring. Two Gigabit LAN PortsConnect two devices to the Vigor 166 with 2 Gigabit (10/100/1000Mbps) LAN ports. No need to disconnect Ethernet WAN to check connectivity. Add DSL connectivity to any RouterIdeal Partner device for DrayTek dual-WAN products or any other vendor’s Ethernet WAN firewall. Reports DSL Line Status on DrayTek Vigor routers. No Setup NeededWorks as a modem with most ISPs, straight out of the box. Pre Configured to work with most UK ISPs. Just set the username and password on your router. Full-Bridge Modem and MoreTwo operation modes for the Vigor 166 allow it to operate as a fully bridged DSL to Ethernet Modem, or as a mini Router with NAT DMZ Host. Wall or Shelf MountableCan be installed securely on a wall or shelf with screw fixings to hold it in place. Mounting kit included. Technical Specifications Physical Interfaces2 x Gigabit Ethernet (1000Mb/s) PortsWAN1 : G.Fast/VDSL – RJ-11Recessed Factory Reset button PerformanceMax G.fast Sync Rate: 1.3Gb/s (dependent on ISP & Exchange equipment)Max VDSL2 35b Sync Rate: 300Mb/sMax VDSL2 17a Sync Rate: 100Mb/sMax ADSL2 Sync Rate: 20Mb/s NAT Performance:– Firewall: Up to 700Mb/s (940Mb/s with Hardware Acceleration)– NAT Sessions: 10,000 WAN FeaturesPre-Configured with OpenReach network VLAN tag 101WAN1 Service & Customer (double-tag) VLAN supportMaximum MTU 1508 G.Fast & DSL CompatibilityBT Infinity Option 1 & Option 2 CompatibleCompliant with Openreach SIN 527 & SIN 498Auto Detection of G.Fast and VDSL line modesSupport for G.INP & VectoringG.Fast Standards:– ITU-T G.9700, G.9701 G.Fast– Profile: 106MHzVDSL Standards: – ITU-T G.993.1 VDSL– ITU-T G.993.2, G.997.1 VDSL2– Band Plan: G.998, G.997– Annex A, Annex B, Annex C– VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 35b– OLR, UPBO, DPBO Supported– US0 Supported– Loop Diagnostic Mode– DSL Forum WT-114ATM Protocols:– RFC-2684/RFC-1483 Multiple Protocol over AAL5– RFC-2516 PPP over Ethernet– RFC-2364 PPP over AAL5– Support for RFC4638 for MTU up to 1500 Network FeaturesDSL Status Display with DrayTek Vigor routers Management InterfacesWeb-Based User Interface (HTTP / HTTPS)CLI ( Command Line Interface ) via Web Console, Telnet or SSHConfiguration Backup / RestoreFirmware Upgrade via Web Interface, TFTP Router mode Firewall & NAT FeaturesDMZ HostNAT Port ForwardingNAT Port RedirectionALG (Application Layer Gateway): SIP, RTSP, FTP, H.323VPN Pass-Through: PPTP, L2TP, IPsec Object-based IPv4 / IPv6 FirewallMAC Address FilterSPI ( Stateful Packet Inspection ) with FlowTrack MechanismDoS / DDoS ProtectionIP Address Anti-spoofingBind IP to MAC AddressDHCP ServerStatic Route & IP Routed SubnetURL Keyword FilteringDynamic DNSIGMP Proxy Router mode WAN ProtocolsDHCP ClientStatic IPPPPoE / PPPoAIPv6: PPP, DHCPv6, Static IPv6, TSPC, AICCU, 6rd, 6in4 StaticTunnelMulti-PVC/VLAN virtual WAN interfaces for Management / IPTVservices Router mode Management FeaturesSyslogSNMP v2 & v3VigorACS ManagementTR-069TR-104NTP ClientBuilt-in Diagnostic Function (ping, traceroute) Operating RequirementsWall MountableOperating Temperature : 0 °C ~ 45 °CStorage Temperature : -25 °C ~ 70 °CHumidity 10% ~ 90% (non-condensing)Power Consumption: 6.6 Watt Max.Dimensions:– Length: 181mm– Width: 125mm– Height: 40mmWeight: 280gOperating Power: DC 12V 1A (via external PSU, supplied)Power Requirements : 220-240VAC Box ContentsVigor 166 ModemQuick Start GuideRJ-11 DSL CableCat-5e RJ-45 CableScrews & wall plugs for wall mountingDC 12V PSU